Objet 260 Connex1
Model materials:
  • Rigid Opaque (VeroWhitePlus, VeroBlackPlus, VeroGray and VeroBlue)
  • Rubber (Tango family)
  • Transparent (RGD720 and VeroClear)
  • Simulated Polypropylene (Endur and Durus)
  • Biocompatible (MED610)
  • High Temperature (RGD525)
Support material: FullCure 705 non-toxic gel-like photopolymer support
Material cartridges: Eight sealed 3.6 Kg (7.9 lbs) cartridges. Three different model materials can be loaded simultaneously in the high-capacity material cabinet, and can be hot-swapped.
Net build size: 255 × 252 × 200 mm (10.0 x 9.9 x 7.9 in.)
Layer thickness: Horizontal build layers as fine as 16 microns (0.0006 in.)
Build resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi
Accuracy: 20-85 µm for features below 50 mm; up to 200 µm for full model size (for rigid materials only, depending on geometry, build parameters and model orientation)
Workstation compatibility: Windows 7 32/64-bit
Network connectivity: LAN – TCP/IP
Size and weight: 870 × 735 × 1200 mm (34.25 × 28.9 × 47.25 inches); 410 kg (902 lbs)
Material Cabinet: 330 x 1170 x 640 mm (13 x 46.1 x 26.2 in.) 76 kg (168 lbs)
Power Requirements:110–240 VAC 50/60 Hz; 1.5 KW single phase
Regulatory Compliance: CE, FCC
Operating Conditions: Temperature 18-25 °C (64-77 °F); relative humidity 30-70% (non-condensing)
GET A QUOTECLOSE